Introduction
Offering a regular service and maintenance to your coin washer dryers is the only way to support their long life span and optimized laundry performance. What should be the frequency of offering regular service and maintenance? Well! It might vary. However, the machine maintenance is generally dependent on few features such as the type of machine, its frequency of usage and the manufacturer’s recommendations.
This blog post will help you understand the general guidelines for offering maintenance and care to your coin operated washing machines to enjoy a non-stop laundry service. Here is the simple breakdown of steps, if followed can be useful:
- Daily and Weekly Inspections
Daily and weekly inspection includes few simple tasks such as cleaning the lint filters, checking for any visible leaks and damages or inspecting seals and gaskets on a daily and weekly basis. This inspection can help you spot and address any small issues before they become worst.
- Quarterly Inspections
If you perform a detailed service, this may include inspecting and offering a professional maintenance service to its all internal components. These components may include water inlet valves, belts and drain system. This inspection and maintenance will help you enhance your equipment efficiency and will prevent it from unexpected downtimes and malfunctions.
- Annual Inspections
It is highly recommended that you must develop a comprehensive plan to offer a detailed inspection and maintenance done by a professional expert. The annual inspection may include a deep cleaning, checking and calibrating the machine’s controls and lubricating the moving parts. This also includes inspecting the entire electrical connections including wiring, sockets and main electrical control systems.
A Smart Tip: Adhering to Manufacturers Guidelines
While performing maintenance tasks, always follow the manufacturer’s instruction manuals for any specific maintenance needs. Remember, different machine models have unique maintenance requirements or may have different service intervals.
Additional Considerations for Maintaining the Coin Operated Washing Machine
Offering Regular Cleaning and Sanitization
- Sanitize the Dispensers: Clean the detergent dispenser to help prevent mildew and mold growth.
- Clean the Washing Drum: Clean the washing drum on a regular basis. Utilize a damp cloth to remove any detergent residue and lint. For a more detailed cleaning, running an empty cycle with any commercial cleaning solution is highly recommended.
- Disinfect the Touchpoints: Check the finger points and disinfect those surfaces like control panels and door handles and especially the coin slots. You can do it with the help of any good disinfectant to reduce the growth of germs.
- Inspect the Drain Pump: Regularly check the drain pump for any blockage or dirt. You must clean it on a regular basis to ensure there is proper drainage.
Replacing the Worn Parts
- Inspect the Shock Absorbers: Shock absorbers of the machine help you stabilize the machine during its spin cycle function. You must check for any leaks or any damages and must replace the worn parts immediately.
- Check the Door Seals: Ensure you keep inspecting the door seals. Make sure they are intact. A damaged seal can lead to water leaks and can reduce your machine’s water efficiency.
- Inspect the Drum’s Agitator: The washing tub agitator is a key component that can helps your machine clean your clothes effectively. Carefully check if it has any loose parts or shows excessive signs of wear and tear. If so, replace it in a timely manner.
- Inspect the Belts and Hoses: Ensure you check the belts and hoses for any signs of damage such as damaged or cracked. Immediately replace the worn parts to avoid future breakdowns.
Maintaining Water Levels
- Inspect the Water Pressure: If you have observed that the water has a low pressure, it can impact the machine’s efficiency. Check the water supply right away and also inspect its water inlet valve.
- Adjust Water Level: Ensure your machine has sufficient water level that is suitable for washing any specific laundry load. Overloading the washing machine can cause poor cleaning performance. It can impact excessive wear on the machine components.
Addressing Problems Right Away
- Check for Errors Codes: Majority of the coin operated washing machines indicate error codes that show there might be a specific machine issue. In that case, check the machine manual and solve the issue.
- Never Ignore the Unusual Noises: Pay close attention to the strange noises coming out of machine while running its laundry function. Unusual noises may indicate the problems in bearings or motor.
- Monitor the Water Level: If you observe the water pooling around your machine, it may be a sign of leaking hose or a blocked drain pump.
Implementing a Regular Professional Maintenance
- Hire an Expert Technician: Consider a qualified technician to perform machine maintenance tasks, inspections and repairs. Their expert services can create a big difference. They can easily identify the potential machine issues early and can address them promptly to prevent major machine’s shutdowns.
- Follow the Manufacturers’ Guidelines: Adhere to the manufacturer’s guidelines to carefully plan your maintenance schedule accordingly. Doing this will ensure a long life span of your coin washer dryers.
Conclusion
The coin operated washing machines are the sure way to offer convenience in the lives of busy individuals in a magical way. To enjoy a consistent laundry operation, offering regular maintenance is very important. You need to have a comprehensive maintenance plan to ensure your machines are running smooth. This plan must include daily, weekly, quarterly and annual check-ups. These regular inspections will help you informed about the conditions and their potential issues that will help you address them promptly.
Additional considerations for maintaining your machines include offering regular cleaning and getting them sanitized. Try to inspect and replace the damaged parts immediately before they stop to work. Furthermore, keep inspecting the water levels on a regular basis. Â Be vigilant about the unusual noises and replace the worn parts immediately. Remember, getting the expert help in terms of machine maintenance can create a real difference.
By following these smart maintenance plan and practices, you can surely extend the lifespan of your coin operated washing machine, can minimize its downtimes and experience a positive laundry experience. Remember, a well-maintained washing machine saves your money and enhances your customer’s satisfaction that is the lifeline for running a booming coin laundry business in UAE.
